Nitrile Cleanroom Gloves (1000 Gloves)

From: $184.33

 
Size Small
Size Large
Size XL
Clear

• No Silicone Oil, Amides, or Phthalate (DOP)

• ESD Safe. Surface Resistivity of less than
1 x 1010 ohms (ANSI / ESD STM 11.11)

• Micro-textured Finger Tips | Multiple Sizes

• Sold in 1000 glove cartons

Prices

SizesQty 1-9 (1000-9000 Gloves)Qty 10+ (10,000+ Gloves)
Small-XL$184.33$157.99
2XL$233.84

Specs

ESD ResistanceDecay TimeTribo ChargeTest Method
< 1 x 1010 ohms / square < 0.5 seconds < 20 volts ESD STM 11.11
Purity SpecificationsParticlesUpper LimitsTest Method
> 0.5 micron < 2500 particles / cm2 IEST-RP-CC005.2
Purity SpecificationsTotal NVRUpper LimitsTest Method
DIW Extractant < 1.6 mg/g IEST-RP-CC005.2
IPA < 35 mg/g IEST-RP-CC005.2
Purity SpecificationsIons (< 50 ppm)Test Method
AnionsFluorideChloride IEST-RP-CC005.2
NitriteCationsLithium
SodiumPotassiumBromide
PhosphateNitrateSulphate
AmmoniumMagnesiumCalcium
Purity SpecificationsCopper CorrosionTest Method
No Visible DiscolorationIEST-RP-CC005.2
Silicone oil, Amide, Phthalate (DOP) PresenceFT-IRTest Method
Not DetectedIEST-RP-CC005.2

Sizes

SizeLengthWidth
Small11.5 inches3.34 inches
Medium11.5 inches3.75 inches
Large11.5 inches4.15 inches
XL11.5 inches4.5 inches
2XL11.5 inches5 inches

Length is measured from tip of middle finger to cuff; width is measurement of the cuff opening. There is a 5mm margin of error.

Durability

DurabilityTensile StrengthElongation at FailTest Method
Before Aging14 Mpa, Minimum500% MinimumASTM D-4412 and D-573
After Aging14 Mpa, Minimum400% MinimumASTM D-4412 and D-573
Freedom of Holes1.5 AQLASTM D-5151
Nominal Thickness5 mil / 0.13 mmASTM D-3767 and D-6319
Nominal Length12 inches / 305 mmASTM D-3767 and D-6319

Reviews

There are no reviews yet.

Be the first to review “Nitrile Cleanroom Gloves (1000 Gloves)”

Your email address will not be published. Required fields are marked *

You may also like…