Statguard® Static Dissipative Coating

SKU: N/A Category: Tags: , ,

From: $171.49

 
Size Large
Clear

• Static Dissipative: Converts hard floors to static dissipative surfaces.

► Static Dissipative: 1 x 106 to < 1 x 1010 ohms square per ANSI/ESD S7.1 and ESD TR53

• Off White Opaque

Prices

SizeWeightQty 1-9Qty 10+
2.5 Gallons23 lbs$171.49$159.24
5 Gallons46 lbs$331.63$307.94

Specs

► Static Dissipative: 1 x 106 to < 1 x 1010 ohms square per ANSI/ESD S7.1 and ESD TR53

DimensionMeasurement
EnvironmentFor interior use only
ColorOff White Opaque
SealingIndustrial Grade Acrylic , polyurethane, or vinyl based sellers are recommended to seal high porosity floors before applying. New concrete should cure 60 days before sealing.
ThinningNot recommended: adding water will reduce conductivity of coating
Spread Rate2000 square feet per gallon on smooth surfaces
Clean UpClean using water. Do not use any wet maintenance until 72 hours after installation.
DryingAllow to dry for 12 hours at a temperature in excess of 55F (13C) and under 90F (32C) with 50% RH (relative humidity).

Grounding

► Static Dissipative: 1 x 106 to < 1 x 1010 ohms square per ANSI/ESD S7.1 and ESD TR53

DimensionMeasurementTest Method
Surface Resistance1 x 106 to < 1 x 1010 ohms squareANSI/ESD S7.1 and ESD TR53
Charging< 50 voltsANSI/ESD STM 97.2
Charge Decay5000 volts to 0 volts in 0.01 secondsFTMS 101C 4046

Reviews

There are no reviews yet.

Be the first to review “Statguard® Static Dissipative Coating”

Your email address will not be published. Required fields are marked *

You may also like…