Simco Ion™ AirForce Blow Off Gun | Hand Held


Order Form

• DC Corona Ionization. Eliminates Static from Ungrounded Objects

• Compatible with Class 10 / ISO Class 4 Cleanrooms.


Product Qty 1+
Simco Ion™ AirForce Ionizing Gun $1,010.00


Dimension Specification
Discharge ± 1000-100V 1.0 seconds @ 6″ (15.2cm), 30 PSI
Balance ± 30V
Cleanroom Class Meets ISO 14644-1 Class 4 (Fed Standard 209E Class 10)
Console Power 24 VAC, 10W powered from wall transformer
LED Indicators Green on both console and gun
Ion Emission Steady State DC
Emitter Points Tungsten emitter points
Audible Noise 70 dBA @ 1m, 30 PSI
Conducted EMI 29 dubV; average level 100 KHz to 1.1 MHz
Ozone <0.005 ppm (typ)
Blow-off Force 41g @ 30 PSI; Measured @ 3″ (7.6cm) from a 2″ (5.1 cm) diameter target
Air Hose Static-dissipative polyurethane, 3/8″ outside diameter; 8 feet ( 2.4 meters) / 65 PSI
Gas Input 20-65 PSI, Clean Dry Air or Nitrogen
Gas Connection 1/4″ male industrial interchange quick disconnect
Gas Air Filter 99.9% efficient, 0.01 micron or larger air particles; 99.9% coalescing efficiency
Mounting Metal mounting plate attaches to back of console
Enclosure Gun/console: static-dissipative polycarbonate (gun hanger 302 stainless steel); optional outing stand for hands-free operation
Dimensions Gun: 8 inches (length) x 3 inches (width) X 1 inch (depth) (20.3 X 7.6 X 2.5 cm); Console: 8.5 inches (length) x 3 inches (width) x 1.6 inches (diameter) (21.6 x 7.6 x 4.1 cm)
Weight Gun: 12 oz (341g) with 8 foot (2.4m) air hose; Console: 11.5 oz (326g)
Warranty Two year limited warranty

Steady State DC Corona Ionization

Steady-State DC Corona Ionization. Steady State DC Corona Ionization continuously applies positive high voltage to half of the emitter points and negative high voltage to the other half. Steady-state DC ionization may be employed with low or high airflow, so it is commonly used in room systems and blowers.

How does DC Air Ionization Work?

It’s important to keep in mind that although an ionizer can be AC powered, it can ionize its emitter points using direct current (DC).

Unlike AC corona ionization, which emits both positive and negative ions from the same emitter point, DC corona ionizers emit ions from separate positive and negative emitter points. Since the ions are emitted from separate points, there is much less recombination of ions.

How does ESD Air Ionization Work?

When AC (alternating current) or DC (direct current) is applied to a sharp emitter point it creates an electric field or “corona” around the emitter. This high voltage corona of ions then interacts with electrons in the nearby gas molecules “cleaning” the air of unwanted charged air molecules.

ESD Air ionizers are used to remove static electric charges from the surfaces of ungrounded objects. (Keep in mind, you can use anti static mats to ground table tops and standing surfaces.) However, if you need to make sure static is not building up on your workstations consider using ESD air ionization.


There are no reviews yet.

Be the first to review “Simco Ion™ AirForce Blow Off Gun | Hand Held”

Your email address will not be published. Required fields are marked *

You may also like…