Simco Ion™ Aerostat XC Blower

$808.00

Order Form

• Eliminates Static from Ungrounded Objects
• Includes Heater to Warm Air Blowing

When AC (alternating current) is applied to a sharp emitter point it creates an electric field or “corona” around the emitter. This high voltage corona of ions then interacts with electrons in the nearby gas molecules on the target (plastic bags, circuit boards, etc.) removing charge from it.

Specs

DimensionSpecification
Input Voltage120 VAC, 60 Hz: 0.6A (fan high, heater off); 3.6A (fan high, heater on)
220-230 VAC, 50 Hz: 0.3A (fan high, heater off); 1.8A (fan high, heater on)
Discharge Time1.5 seconds @ 1 Foot; fan speed high (1000v to 100v)
Balance0±5V
Ion EmissionAC Ionization
Emitter PointsStainless Steel
ControlsPOWER ON/OFF switch,
WARM AIR ON/OFF switch,
FAN SPEED control LOW/MEDIUM/HIGH,
Emitter Point Cleaner Knob
Indicator LightsOrange IONIZATION status;
orange within POWER and WARM AIR switches
Coverage3′ x 5′ to 2.5′ x 6′ area
Air Volume70 cubic feet per minute (low),
95 cubic feet per minute (medium),
120 cubic feet per minute (high)
Air Velocity (Low)600 feet per minute @ 1′,
300 feet per minute @ 2′ feet,
180 feet per minute at 3′,
150 feet per minute at 4′
Air Velocity (Medium)800 feet per minute @ 1′,
400 feet per minute @ 2′ feet,
220 feet per minute at 3′,
180 feet per minute at 4′
Air Velocity (High)1000 feet per minute @ 1′,
500 feet per minute @ 2′ feet,
250 feet per minute at 3′,
200 feet per minute at 4′
Heated Air TempFan High: 4-5F (2-3C) above ambient;
Fan Medium: 4-5F (2-3C) above ambient;
Fan Low: 5-7F (2-3C) above ambient;
(measured at 12″ in front of blower)
Operating EnvironmentTemperature 50-95F (10-35C);
humidity 30-70% relative humidity, non-condensing
Audible NoiseFan Speed Low: 52 dB;
Fan Speed Medium 58 dB;
Fan Speed High: 64dB
Ozone0.05ppm, measured @ 6″ in front of unit
Air Filter30 ppi open cell polyurethane foam (optional)
MountingMetal stand/bracket included
(optional pedestal mount kit for elevated mounting and locking stand kit)
EnclosurePowder-coated white steel
Dimensions15.375 inches (width) x 4.5 inches (height) x 8.125 inches (depth)
(39.1 x 11.4 x 20.6 cm)
Weight17.5 lb (7.9 kg)
WarrantyTwo year limited warranty

AC Corona Ionization

AC Corona Ionization. When an AC ionizer is used high voltage is applied to a single emitter point that cycles between negative and positive at line frequency (50/60 Hz).

When should I use an AC Air Ionizer?

AC corona ionization is most appropriately used in industrial applications where the ionizer can be placed close to the charged objects.

How does ESD Air Ionization Work?

When AC (alternating current) is applied to a sharp emitter point it creates an electric field or “corona” around the emitter. This high voltage corona of ions then interacts with electrons in the nearby gas molecules “cleaning” the air of unwanted charged air molecules.

Reviews

There are no reviews yet.

Be the first to review “Simco Ion™ Aerostat XC Blower”

Your email address will not be published. Required fields are marked *

You may also like…