ESD Shoe Covers

$120.00

This item is currently out of stock. Request a backorder here.

Made 100% Non-Woven with Compressed Polyethylene (CPE) with a black carbon-loaded conductive strip down the middle that tucks into the heel of the shoe.

• Fits (US Men & Women) sizes 5-12

• Sold in Cases of 150 Pairs.

Prices

Note: Cases are packed 300 shoe covers a case.

Qty 1-9 CasesQty 10+ Cases
$120.00$100

Product Name: ESD Shoe Covers Product Brand: Elimstat Product Description: Made with conductive black strip for ESD grounding wearers feet as they walk on static dissipative or conductive surfaces. Product Image: https://www.elimstat.com/wp-content/uploads/2015/10/ESD-Safe-CPE-Shoe-Covers.jpg Product Price: 120.00 Price Currency: USD Name Of The Seller: Elimstat.com

Specs

• 16 inch Length (Large)
• (CPE) Compressed Polyethylene / Plastics

ESD Safe Shoe Covers are made with a conductive black carbon strip for ESD Safety.

ESD Safe Cleanroom Shoe Covers

The (black) carbon-loaded conductive strip is used in conjunction with an anti static mat roll laid out as “floor runner”, or a conductive mat.

The ankle wrap is elastic so that it stays on the shoe while in use.

• 16 inch Length (Large)
• (CPE) Compressed Polyethylene / Plastics

ESD Safe Shoe Covers are made with a conductive black carbon strip for ESD Safety.

The (black) carbon-loaded conductive strip is used in conjunction with an anti static mat roll laid out as “floor runner”, or a conductive mat.

The ankle wrap is elastic so that it stays on the shoe while in use.

ESD Safe Cleanroom Shoe Covers

Product Name: ESD Shoe Covers Product Brand: Elimstat Product Description: Made with conductive black strip for ESD grounding wearers feet as they walk on static dissipative or conductive surfaces. Product Image: https://www.elimstat.com/wp-content/uploads/2015/10/ESD-Safe-CPE-Shoe-Covers.jpg Product Price: 120.00 Price Currency: USD Name Of The Seller: Elimstat.com

ISO Clean Room Requirements for Cleanroom Gowning

ProductImageISO 8
Class 100,000
ISO 7
Class 10,000
ISO 6
Class 1,000
ISO 5
Class 100
ISO 4
Class 10
FrockYesYesSDSDNR
GlovesSuggestedSuggestedYesYesYes
Shoe CoversSuggestedYesYesYesYes
Hair NetsYesYesYesYesYes

Yes – Recommended (per IEST standards)
NR – Not recommended (per IEST standards)
SD – Situation dependent / Application specific (per IEST standards)
Suggested – Suggested based on the collective experience by the working group

Product Name: ESD Shoe Covers Product Brand: Elimstat Product Description: Made with conductive black strip for ESD grounding wearers feet as they walk on static dissipative or conductive surfaces. Product Image: https://www.elimstat.com/wp-content/uploads/2015/10/ESD-Safe-CPE-Shoe-Covers.jpg Product Price: 120.00 Price Currency: USD Name Of The Seller: Elimstat.com

Connect Shoe Covers to Earth

While wearing the shoe cover you should be standing on a grounded mat.

The grounded mat is typically an anti static mat roll laid out as “floor runner” or a conductive mat. These mats should be connected by grounding cable to an electrical outlet.

Electrical outlets are normally the best ground for a shoe cover in any building. This is because the wiring of outlets typically follows the piping of the building to earth underneath the building.

As the shoe covers make contact with the grounded mat the electricity that was static on your shoes and lower body is dissipated- literally falls into the Earth through the ground.

Diagram of How an ESD Shoe Cover balances charge

Product Name: ESD Shoe Covers Product Brand: Elimstat Product Description: Made with conductive black strip for ESD grounding wearers feet as they walk on static dissipative or conductive surfaces. Product Image: https://www.elimstat.com/wp-content/uploads/2015/10/ESD-Safe-CPE-Shoe-Covers.jpg Product Price: 120.00 Price Currency: USD Name Of The Seller: Elimstat.com

Reviews

There are no reviews yet.

Be the first to review “ESD Shoe Covers”

Your email address will not be published. Required fields are marked *

You may also like…