ESD Packaging Tape

From: $33.07

 
Clear

 

Meets ANSI/ESD S20.20 and IEC-61340 requirements for low charging and static dissipative tapes, labels, and liners. Available in 1/2 inch, 3/4 inch, 1 inch, and 2-inch widths.

Prices

Width Rolls Per Sleeve
Half Inch Wide 24 Rolls $45.28
Three Quarter Inch Wide 16 Rolls $44.10
One Inch Wide 12 Rolls $41.47
Two Inches Wide 6 Rolls $33.07

Specs

Measurement Value
Length 36 Meters
Core 3 Inches
Thickness 1.9 mils
Adhesive Acrylic Based
Grid Material Carbon / Polypropylene
ESD Resistance of Grid Layer 103 to 104 Ohms (ASTM D-257)
ESD Resistance of Top Layer Less than 1012 Ohms (ASTM D-257)
ESD Resistance of Sticky Layer Less than 109 Ohms (ASTM D-257)
Tribocharging Less than 100 volts
Maximum Temperature 140F | 60C

ESD Control

ESD Conductive Grid Tape prevents sparking on both its inside and outside surfaces.

Made with a static shielding conductive grid that blocks electrostatic discharges (ESD), the outer two static dissipating layers will not shed, crack, chip, or rub off.

Diagram of How ESD Tape is Conductive and Static Dissipative

When used with a grounded tape dispenser the amount of static electricity generated is effectively zero.

Conforms with ANSI/ESD S20.20 and IEC-61340 requirements for low charging and static dissipative tapes, labels, and liners.

Shipped in secured IC DIP tubes and printed with ESD symbols.

Reviews

There are no reviews yet.

Be the first to review “ESD Packaging Tape”

Your email address will not be published. Required fields are marked *

You may also like…